Even after the timely discussion of "green lie" this week, I am still unsure of the best method to eliminate grassy vegetation around the pine, cedar and oak seedlings we are putting in this spring. I feel this is very important because we lost a whole planting to voles in 2013.
• Parameters: about 50 pine/cedar/oak seedlings
• Setting: 18 acres of what will be grazed pasture with borders of trees at the margins.
• Location: Monroe County NY --- moist to wet loam with heavy deer pressure
2013 all trees wiped out by voles --- had heavy snow and the critters ate thru the plastic tubes and maybe deer helped by knocking stakes over. When the snow melted there was nothing left of the seedlings. They were planted into grassy pasture with no clearing around.
2014 all seedlings survived (20 oaks) they were protected by 1/4" hardware cloth sleeves, 2' staked and had a plastic tube over them with wood pallets for protection (we went crazy on this, it was time consuming and costly to make the hardware cloth sleeves)
2015 so far: 50 pine seedlings staked (not sure what protection we will give them over the winter we feel we need to keep the area around the seedlings clear of grassy vegetation because of the voles and other rodents.)
A family member does not want to use chemical sprays. I suggested a propane heat gun but he seemed to think this was going to be costly. He also seems to think we were just unlucky that first year and we need not clear the grass from around the trees. Using a shovel seems to me to be very time consuming and something that will just not be done. What would you use? Joanne

Views: 255

Reply to This

Replies to This Discussion

"What would you use?"

I would use the family member that does not want to use chemical sprays to do all the work!  : )

It looks like the hardware cloth and pallets helped protect the seedlings.  And, to help reduce the grassy vegetation around the seedlings you could define a 5' diameter circle around the seedlings, clear that area, perhaps lay down some ground cloth and top with a mulch.  Then add......hardware cloth and pallets....

Now why did I not think of that! I will get my magic wand out and make it so.

Seriously though, I read that weed mat does not discourage, and may even encourage ground critters like voles to take cover under them.  To be fair, we did not have the depth of snow in 2015 winter as we did in 2014.

I do think the pallets provided shelter from the deer. The pallets may have spooked them -- no tracks in the area. 

 In another area where we used 3' unenergized portable fence there were tracks

Looking up a propane torch, I find that this will require repeated treatments. That means that I will have to skulk about with it several times to get this done. 

What chemicals are recommended for this purpose?  We are talking about 100 new plantings overall.

Hi Joanne:

Mechanical (AKA organic) treatments can be effective but sometimes at the cost of labor, time and repeated entry.  As Dean notes, some people who favor organic treatments often re-assess their perspective when they get involved in the effort.

I too have heard that the weed mats can provide cover for rodents.  I suspect they have utility when you have a tree tube that is buried an inch or so into the soil.  Rodents won't chew through 0.25 inch hardware cloth, but that doesn't offer the greenhouse advantage of the tree tubes.  Tree tubes, if you go with herbicides, also protect the seedlings from overspray.

Flame weeding might be an option.  The seedlings will be very sensitive to heat, so perhaps flame a 3 ft diameter patch at each planting site before planting.  You can plant immediately.  If you have already planted, you might find a double or triple walled wood stove chimney pipe you could use to insulate the seedling while you flame.  After flame (or another mechanical sterilization technique), use 3 to 4 inches of sawdust. Sawdust offers weed protection because of high C:N ratio and helps retain moisture.  Don't incorporate the sawdust into the soil as it will bind N and slow tree growth.

If you want to go the herbicide route, use a glyphosate based product such as Accord XRT II or Round-up.  I treated about 150 seedlings last week and used about 600 ml of 52% concentrate in 6 gallons of water (just to give you some rough numbers). This was about a 4% active ingredient concentration (I don't recall the exact concentration of the mixture).  A different starting concentration would have a different mixing ratio.  i have a column in the latest issue of NY Forest Owner on mixing ratios. www.nyfoa.org and that I'll post to www.ForestConnect.info in a couple weeks.

The seedlings I treated are part of a reforestation experiment.  The competing grasses are sprayed twice a year (takes about three hours per treatment).  The grass between the rows is mowed 3x/summer to limit the suitability of the habitat for rodents and make them easier targets for predators. Thus we use a combination of organic (mowing) and chemical (foliar spray at each seedling) to control herbaceous weeds.  As you noted the weeds both compete with the seedlings and provide habitat for rodents.

If this is your only use of glyphosate, you could find a likely find a quart or two at a local farm/garden store and mix according to the details on the label.  If you want to use for other projects, you could get 2.5 gallons of concentrate, for about the cost of a couple quarts, via www.arborchem.com   and if you're a NYFOA member i believe you get the contractor's price.

There is good information on site preparation and planting in our bulletin on Northeast Tree Planting and Reforestation here

Thanks Peter, That's everything I wanted to know. Joanne

Follow up 

...some people who favor organic treatments often re-assess their perspective when they get involved in the effort.

That's exactly what happened!

Dean, Good answer to use that relative who opposes, hehe!

Joanne: there is a product you can get called "Avenger Weed Killer". It does kill weeds and grass. The active ingredient is d-limonene 70% which is extracted from citrus fruit such as oranges, lemons, and limes. It comes as a RTU product and in various sizes of concentrates such as 1/2 gallon, one gallon, and 2.5 gallon packages. Its about $25 for the 1/2 gallon and $55 for the gallon size. You should be able to see results after a couple of hours and it is ORMI listed.

You may have to use sprays to keep the deer away too especially if you don't want to make hardware cloth sleeves and pallets. Repellants based on putrescent egg solids seem to do the best.

Good Luck!

The voles you have seem like they are mutants from a horror film! Eating plastic? Sesh!

Another follow up in tree planting for 2020.   Our best successes have come from planting seedlings in "Pallet protectors"   Pallets tied together to keep grazing animals out. These are weeded at least 2x per year. Oaks are now about 5-6' tall. We started these from acorns from our mother trees. 

None of the pines made it. Tubes were knocked down by deer we suppose. The voles did the rest. It was a snowy year and they did their work under the snow. Perhaps Spruces would have been a better choice.

We also planted about 200 rooted willows for a "FEDGE". Many of these were just pulled our by ???? others succombed to the heat of summer. We have a batch of fall planted starts in a woven wire fence area with weed mat. We are hoping that the area is too small for deer to want to jump in and too large for the voles to venture far into without over cover. We will update with pics later in the year. 

With regard to the mutant voles, we have watched hawks fly circles over our sheep as they walk through the pasture so they can swoop in and grab the voles as they are disturbed by the sheep. Quite a sight.  Our land is sandwiched between acres of corn fields.and maybe that supports more than the normal number of super-voles. 

Thanks for the update.  Excellent that your oaks made it to 5-6 ft.  Do you know what kind they are?  

Also, I’m happy to know that the hawks know how to follow the sheep!  Our hens used to follow us similarly when we cut the grass.  The noise and fumes and fast machine were no deterrent when it came to catching tasty bugs!

I wanted to share a nice online UK site with writing about silvaculture and pasture.  If you haven’t already read this, then it might be hearty encouragement for the coming season.  It’ so nice to get reinforcement of our ideas, especially when the practice is a so much slow work!  


Hi Joanne:

I was snooping around the NING site and saw this. What became of your seedling planting efforts?  Anything to share with the group on what worked or didn't work?





Saving the American Chestnut

Started by Stephen Kutney in Woodlot Management Aug 24. 0 Replies

Below is a message from the American Chestnut Foundation on the deregulation of the Darling 58 blight-resistant American chestnut.SteveThe 60-day public comment period is now open and will remain open until Monday, October 19, 2020. Here are two…Continue

Forester recommendations?

Started by Roger Rodriguez in Woodlot Management. Last reply by Kelly Nywening Jul 15. 1 Reply

We are new to forestry ownership and need some advice. We would like to be good stewards of the property and also provide occasional profit of some kind, especially to offset the taxes we pay on the property. I was thinking tree farming (?) as a…Continue

Nitrogen fixing bacteria for Alder trees

Started by Joanne Vaughn in Woodlot Management. Last reply by Joanne Vaughn Jul 11. 14 Replies

I am thinking of starting some alder trees from seed for planting into an area that does not and has not hosted alders.  How can I gain the nitrogen fixing bacteria for inoculation of the roots ?  Continue

How long do brush cutter blades work?

Started by Joanne Vaughn in Woodlot Management. Last reply by Ely McLaughlin Jul 8. 1 Reply

I dunno maybe it's because time flies when it's multiflora rose and buckthorns that are getting whacked. It seems that these blades are needing retirement after 8 or so hours.   Is this typical for this type of material. WIde range of material but…Continue

Tags: cutter, brush

Seeking advice on controlling oriental bittersweet

Started by Kristen Whitbeck in Woodlot Management. Last reply by Lew Ward Apr 15. 2 Replies

A student in my silviculture class is seeking relayed the scenario below. If anyone has any tips or tricks I will gladly pass them along. Thanks in advance!"Oriental bittersweet is choking out my mature white pine trees and my mature apple trees.…Continue

Tags: bittersweet, Oriental

Are Gall's a reason to cull Hickory trees?

Started by Thomas Wilson in Forest Health. Last reply by Ron Goodger Apr 7. 8 Replies

I'll take a photo, but in the meantime....I have a lot of bitternut hickory and some shagbark as well.  I haven't yet noticed any on the shagbark, but about half of the bitternut have gall's.  They get up to about 3 inches in diameter.  Some tree's…Continue

Removal of grass around seedlings in pasture

Started by Joanne Vaughn in Woodlot Management. Last reply by Peter Smallidge Mar 19. 11 Replies

Even after the timely discussion of "green lie" this week, I am still unsure of the best method to eliminate grassy vegetation around the pine, cedar and oak seedlings we are putting in this spring. I feel this is very important because we lost a…Continue

Saving Trees With Tree-Eating Mushrooms

Started by Lew Ward in Forest Health Feb 27. 0 Replies

Saving Trees With Tree-Eating MushroomsControl of Amellaria Shoe-string Rot Fungushttps://youtu.be/FPeBYnGwo4YContinue



© 2020   Created by Peter Smallidge.   Powered by

Badges  |  Report an Issue  |  Terms of Service